FPV frame with landing legs 6/7/8/9 inch

Package Contents

• Carbon fiber drone frame (300/350/380/450mm arm span)

• Landing gear

• Mounting screws and accessories

Assembly Instructions

1. Motor Mounting

   • Attach the motors to each corner of the drone frame using the mounting screws provided.

   • Ensure that the motor direction is correct: front-left, back-left, front-right, and back-right.

2. Electronic Speed Controller (ESC) Mounting

   • Mount the ESCs near the motors, ensuring they are securely attached to the drone frame.

3. Battery Mounting

   • Securely attach the battery to the bottom of the drone frame using the designated mounting points.

4. Flight Controller Mounting

   • Mount the flight controller in the center of the drone frame, making sure it is level and secure.

5. Landing Gear Installation

   • Install the landing gear onto the drone frame according to the manufacturer's instructions.

6. Propeller Mounting

   • Attach the recommended propellers to the motors, following the proper direction: CW for front motors and CCW for rear motors.

Recommended Components List

• Motors: 2212 (e.g., T-Motor, EMAX, or similar)

• Electronic Speed Controllers (ESCs): 30A (e.g., Simonk firmware)

• Propellers: 6/7/810-inch (e.g., HQProp, Gemfan, or similar)

Assembly Tips

1. Make sure all connections are secure and tight before testing the drone.

2. Balance the weight distribution by placing heavier components closer to the center of the drone.

3. Calibrate your ESCs and flight controller according to the respective manuals.